Metal Detectors

MDC11

Metal detectors for granular and powder products in high flow tubing and piping.

The instrument is used in vertical packaging lines: the product goes through the circular transit aperture which, upon detecting metal contaminants, emits an alarm, allowing it to be removed.

The MDC11 is positioned immediately upstream of the packaging machine, just before the product falls into the package, in order to exclude the possibility of further contaminants getting in between detection and closing the package, which can be made from any material. The transit aperture is made with inert materials that ensure the coil is completely sealed. The multi-frequency electronics, combined with advanced functions – like self-check, automatic calibration and tracking – guarantee top level performance and fully meet the most common standards and the need to minimise false rejects.

Product transit aperture diameter: 130 to 240 mm, with a maximum scanning potential of 100 m/minute and it is able to detect any type of metal contaminant: ferrous, non-ferrous and stainless.

MDF11 Pharma

Metal detector for small, high-flow loose pharmaceutical products, like tablets and capsules.

The MDF11 was specifically designed to meet the specific inspection requirements of the pharmaceutical sector. A tilted chute in inert material, easily removable and suitable for direct contact with the product, goes through the metal detector coil. Should metal contaminants be detected while the product is transiting, a flap is activated, which diverts the contaminant out of the production flow.

Equipped with regulators that make it highly adaptable, it is able to scan 10000 pieces/minute and can detect any type of metal contaminant: ferrous, non-ferrous and stainless. The multi-frequency electronics combined with advanced functions – like self-check, automatic calibration and tracking – guarantee top level performance and fully meet the standards in force for Pharmaceutical Metal Detection Systems and the need to minimise false rejects.

MFN11 with 60 conveyor

Metal detector for small and medium sized loose and packaged products.

The multi-frequency electronics, combined with advanced functions – like self-check, automatic calibration and tracking – guarantee top level performance and fully meet the most common standards and the need to minimise false rejects.

The possibility of configuring both conveyor stop and the rejection and reject collection systems allow you to configure the machine based on the checking needs and the available budget, always ensuring product safety and brand protection.

A wide range of available accessories allows you to configure the machine in the most suitable way to inspect the most common formats in the food sector like trays, sacks, bottles, boxes of different shapes and sizes with no metal parts.

The transit aperture inner ring in food-safe plastic allows the machine to be used even with loose product.

MFN11 with 70 conveyor

Metal detector for medium and large sized loose and packaged products.

The multi-frequency electronics, combined with advanced functions – like self-check, automatic calibration and tracking – guarantee top level performance and fully meet the most common standards and the need to minimise false rejects.

The possibility of configuring both conveyor stop and the rejection and reject collection systems allow you to configure the machine based on the checking needs and the available budget, always ensuring product safety and brand protection.

A wide range of available accessories allows you to configure the machine in the most suitable way to inspect the most common formats in the food sector like trays, sacks, bottles, boxes of different shapes and sizes with no metal parts.

The transit aperture inner ring in food-safe plastic allows the machine to be used even with loose product.

MFS11

Metal detector for small sized loose and packaged products.

Using a compact metal head allows you to fulfil the requirement to check for metal contaminants even in very limited spaces, while also managing contaminated product collection.

The multi-frequency electronics, combined with advanced functions – like self-check, automatic calibration and tracking – guarantee top level performance and fully meet the most common standards and the need to minimise false rejects.

The possibility of configuring both conveyor stop and the rejection and reject collection systems allow you to configure the machine based on the inspection needs and the available budget, always ensuring product safety and brand protection.

A wide range of available accessories allows you to configure the machine in the most suitable way to inspect the most common formats in the food sector like sacks, boxes and cardboard boxes of different shapes and sizes with no metal parts.

The transit aperture inner ring in food-safe plastic allows the machine to be used even with loose product.